How to Flash Lava Iris 870 With PC via SP Flashtool

"How to Flash Lava Iris 870" - Assalamualaikum guys, this discussion we provide "how to flash Lava Iris 870" using flash driver named Smartphone Flastool or abbreviated SP Flashtool. Before describing "how to flash Lava Iris 870" we want to ask whether your problem is like stuck in the logo, out force stop writing, or even usually full death? Well for how to overcome the bootloop, hang logo, softbrick, etc., we recommended to do flashing Lava Iris 870 for the problem quickly resolved.

How to flash Lava Iris 870 is not too difficult if it has understood the steps, but if friends do not follow step by step in a coherent and correct it will result in a greater damage again. If asked about the success rate, just calm down because the way Lava Iris 870 flash below has been tested by many people and the result is so satisfying that it makes the HP back to normal as before.

"How to Flash Lava Iris 870"

There are some things needed to flash Lava Iris 870, because it is not enough with just SP Flashtool only, but it requires other files like USB Vcom for MTK driver, Lava Iris 870 firmware, and tools like computer. SP Flashtool is created specially by Mediatek for flashing Android Android Mediatek chipset, so it is ascertained the success percentage reaches 98%. Why only 98%? That's because we do not want to give you full hope for success.

Please attention the way how to flash Lava Iris 870 below, but previously complete the first files needed, do not forget to like and share this article to social media and others to make it more useful for the crowds. Please continue reading below.

First prepare the tools and materials below

• Surely we need a Lava Iris 870 phone.
• Laptop or PC can borrow ketemen or kewarnet.
• A good USB data cable if not any pinjem also allowed.
• Firmware Lava Iris 870.
• SP Flashtool for all device types. (Choose one only)
• USB MTK Driver. (Required to take and install)
• Next iktui tutorial how to flash Lava Iris 870 below

NB: Before making the flash below make sure the battery is at least 15% (generally), but we usually anticipate the things that are not desired with charge your battery up to 50%.

Second, Follow the Steps Bellow 

1. Extrack all the .rar or .zip files that have been taked earlier, it will appear firmware Lava Iris 870 and SP Flastool software and drivers.
2. Install Drive Vcom / USB MTK Driver above first.

   

   Chose Yes

3. If so, open SP Flash Tool with right click and select Open in Administrator. [Run as administrator]

   

   Chose Scatter Loading

4. Once it's open, click on the Scatter loading tab or its peers.
5. Find the scatter firmware on the file has diextrak was usually the writing MT6572_android_scatter.txt or so select and open the file it will be arranged automatically.

   

   Done Chek the Preloader

6. "Do not check Preloader" after that turn off the phone and release the battery for a few seconds, then plug it in again but do not turn on first.
7. Press Download / Firmwrae Upgrade on the SP Flashtool.

   

   Wait Proces untl Done

8. Press Vol UP + Down when Lava Iris 870 is off simultaneously and do not let go. Put USB to your computer and mobile phone by pressing the volume button.
9. If successful then the flashing process Lava Iris 870 will run automatically. You may release the button pressed earlier if the flashing process is already running.

   

   If Proces Done

10. Wait, when finished usually there is OK or PASS word with tick.
11. Remove the HP from the computer and then unplug the battery for a few seconds, then plug it in again and turn it on, remember the first boot is usually a bit long.
12. Done

Some smartphones sometimes fail but eventually succeed, so just a matter of persistence in trying it, for "how to flash Lava Iris 870" above if you want to comment on it please submit below. Thank you for your attention to how to flash Lava Iris 870 which we have mentioned above and assalamualaikum wr.wb.